Search This Blog

Tuesday 28 January 2020

Making an Automatic Sliding Gate



Sliding gates can be quite useful for closing in your yard. In my case a garage door would have cost about the same however limited the usable space. After looking around many places offer prefabricated gates however they seemed a bit more expensive or you would have to pick up the whole gate once it has been made. Given my gate was 4.5 meters wide and 1.5 meters high, I would have had to likely hire a truck and drive a fair distance. Not to mention the gate would have been custom made since i couldnt find anyone who reasonably flat packed that size. Though this may be a viable option for yourself if you want to save on time, effort and to get the desired finish.

After some research I thought i may be able to pull this off. As a general handy kind of person but not too much experience in cutting, welding and general construction - it seemed like a reasonable project to try and tackle.

PLANNING

These are the guides (Jackal Fencing | EasyGate | BMGI | AutomaticGateSolutions ) I read which were very handy on the do's and dont's for sliding gate consutruction and installation. Its recommended to have a read if you're looking to make a start. It definitely helped in preparing for what would be required for the construction and installation.

CONSTRUCTION


After measuring up the following was aquired to make the frame and support posts from a local metal supplier. I found Scott's Metals quite handy for finding metal products and prices for estimation. Atleast when you go into your local supplier you vaguely sound like you know what you're talking about.

  1. 100x100x2 SHS Galvanised steel (2x2.2m)
  2. 50x50x2 - SHS Galvanised steel (1x4.5 and 2x1.58m)
  3. 100x50x2 RHS Galvanised steel (1 x  4.5m)
  4. 25x25x3 angle - (2 x 4.4m)

The slats came down to a choice of Merbau decking or hardwood fence. The total coverage including spacing was 6.732m2. I gave the hardwood fence a go and just sanded it back and clear varnished it. I figure i can always swap them out in the future if i dont like how it weathers. Another consideration was aluminium slats.

Gate weight was also important to calculate since it would provide the specifications for the solar motor and other weight calulations. Not to mention how to maneuver it into place.

Wood:
23kg/m2 x 6.732 (1.53 x 4.4) = 154.836kg

Steel:
50 x 50 x 2mm (2x1530, 1 x 4500)= 2.93kg/m = 22.1508kgs
100 x 50 x 2mm (1 x 4500) = 4.50kg/m = 20.25kgs
25 x 25 x 3mm (4400) = 1.89kg/m = 8.316kgs

TOTAL = 205.5528 kgs

Etch primer and black spray paint was used to finsh the frame and support posts. The primer was just applied using a roller brush. I considered powercoating the whole thing however i would have needed to transport it to and from.

For the Solar Gate Opener I used the weight and gate dimentions to work out a suitable unit. I managed to pick one up as a complete kit which seemed to work well. What i liked about this unit (apart from everything came together) was that it supported inputs of 24v DC/AC and 240v. This meant I could run additional low voltage power without the need of an electrican via a trench if the battery system didnt work as well as I wanted. Its been working perfectly for the last few months so fingers crossed.

Next I just needed a roller kit which allows the gate to slide manually across a track. Only issue with the one I ordered was it didnt come with enough track fasteners which I ordered separately from tigerlink.

Before moving the gate frame into place I had to put down a footing. This was after I cemented the 100x100 posts into place. For the specifications I just used what was in the guides posted above. Trench mesh or reinforcing steel helps with cracking and ensures the track stays straight. I made a conduit hole in the footing for where the additional power to the motor could be run in the event i needed it.

      

A rough sequence of construction was as follows:
  1. measure up everything
  2. dig footing and post holes
  3. cement posts into place
  4. complete track footing
  5. weld up gate
  6. attach rollers to gate
  7. paint gate
  8. prepare wooden slats (pre-drill screw holes, sand and varnish)

INSTALLATION


Once all the construction was finished the gate was installed in the following order. See guides for more detailed information to do some of these steps.
  1. attach track to footing and drive way
  2. move frame into place
  3. attach support rollers, catch and stoppers
  4. install solar kit and motor 
  5. adjust gear tracks accordingly
  6. attach limit switch striker plates
  7. screw slats to frame
The footing and sliding track was a bit tricky during installation since the drive way has a bit of a hump in the middle. I ended up having to cut into the driveway and had the track on a slight slope. While there is no issue with this the trick was keeping the slope straight so that when the gate is sliding it doesnt touch at any point. This is covered a bit more in the lessons learnt section.

The automatic motor needed a support frame to get it to the desired height. This frame was dynabolted into the concrete footing

A good tip is to ensure that the gate moves freely without having the motor move it before you program the electronics. Once the motor is fixed to the ground you can adjust the gear tracks to the right height/position and manually release the motor so it has good connectivity between the tracks and the teeth for the whole time it is moving. Surprisingly this didnt not need to be as perfect as I thought it may to get it working well however the better you get it the less likely it will have issues in the future. 

A video of the final product in full swing can be found here :)

COST

Roller Gate Kit - $253
Steel: $240
Paint: $5
Additionally (counter sunk, respirator) = $10
Primer $29
Rio $10
Solar gate opener $360
Hardwood fence pailings (44) $88
1L varnish and 200 gal 22mm screws $60
26 x Sliding Gate Track Fasteners Zipfix 40mm x 6mm $16.80

TOTAL: $1071.80

LESSONS

Things I would do differently that come to mind are as follows:

Gate Construction

Looking back on it i would have likely welded a coule of extra timber braces into the gate. Currently the slats are fixed at the top and bottom and have the potential to warp over time. By adding the brace it should stop this happening. Maybe something ill do if i replace all the slatting over time.


Support posts

I would consider going with thicker 100x100 posts. While what is there is fine it would just be a bit more sturdy and support for the various screws and bolts better.


Concrete Footing

I would have spent more time on the form work of the footing to get it level and easier to screed. I know at the time it feels like you just want to get into it and move along but i think i would have spent less time and without a cup grinder if i spent more time on this

Not mix by hand! I know the footing looks relatively small but it does end up being time consuming. I think I spent the whole day on mixing and filling concrete. By the end of the day I was knackered and didnt feel like spending much time on the leveling. Looking back on it the leveling is where you want to spend most of the time to get it right. Look into getting a cement mixer, it makes it much easier. But if you're set on mixing by hand, get a mate around to help.

Electronics

I've considered adding beam sensors and a manual switch at the gate for convinience. Not sure exactly how much power these things would consume so I may look at doing this at a later date. The motor supports these functions

11 comments:

  1. I totally agree with this article and I just want to say that this article is a very nice and very informative article.I will make sure to be reading your blog more. Slide Gate Maintenance In Dallas TX

    ReplyDelete
  2. How to make a best titanium flat iron | TITaniumArt
    Titanium is one snow peak titanium flask of the titanium trim hair cutter reviews world's most popular craftsmanship tools, and one of the oldest and babylisspro nano titanium spring curling iron most popular craftsmanship nano titanium tools for babylisspro nano titanium making jewelry.

    ReplyDelete
  3. Garage Door Spring TX
    (281) 849-7950‬
    Our Company is completely authorized and guaranteed for administration you can rely upon. We have the experience to deal with any carport entryway crisis. Garage Door Spring TX offer crisis administration seven days every week. Same day administration much of the time. Regardless of whether you are in Spring County, we can deal with your carport entryway fix needs. We offer the best in Garage Doors serving Spring. Being ready to go for a long time we have the experience you need when Garage Door fix or administration is required. We are focused on giving you top quality carport entryways from makers, for example, Clopay, new Garage Door Openers from Lift expert and Genie, precise establishment and administration or fix on ALL items. We are locally family claimed and worked, completely authorized and protected. Consumer loyalty is our need. At our organization, we offer a wide determination of Garage Doors and Door Openers for both private and business purposes. Our ensured experts introduce and support any make or model. Our Services: Repair, Installation, Opener, Spring, Broken Cables

    ReplyDelete
  4. Garage Door Repair in Pearland TX
    (281) 940-4878
    A garage door has a lot of moving parts that might break or malfunction if you don't keep up with them over time. The springs are one of these components. Spring fatigue occurs as they wear out over time. They will no longer be able to counterbalance the weight of the garage door properly. During this time, your door will get increasingly heavy. Unfortunately, when you have a broken spring, this has been going on for months or even years!
    Our Services: Repair, Installation, Opener, Spring, Broken Cables

    ReplyDelete
  5. Garage Door in League City TX
    (281) 724-4413
    When you require garage door assistance, you want to know that the firm you hire isn't just another slick advertiser who can't actually accomplish the task you require. Legacy Garage Doors is a family-owned garage door company based in Alpharetta that provides a full variety of specialized garage door services. Legacy Garage Doors has been serving the Alpharetta region for many years, providing superior garage door installation, service, and repair in the Atlanta area. Our garage door specialists are highly skilled individuals that live and work in your community and are certified, licensed, and insured. Because all of our garage door specialists are in-house employees, you can rest assured that when one of our technicians arrives to service your garage door, you will be getting the best service possible.
    Our Services: Repair, Installation, Opener, Spring, Broken Cables

    ReplyDelete
  6. Overhead Door Humble TX
    (281) 671-4236
    Upward Door Repair has been doing business for a long time, fixing and introducing carport entryways. Assuming you really want a little fix of you have an entryway that you can't open or close or even need a total substitution, we have the experience and expertise to finish the work. We likewise offer 24 hour support to clients all around the Humble TX region.
    Our Services: Repair, Installation, Opener, Spring, Broken Cables

    ReplyDelete
  7. Garage Door Friendswood TX
    (281) 643-8678
    Observing reasonable carport entryway administration of excellent is difficult. Albeit many specialist organizations guarantee the best administrations to their clients, not every one of them have what is expected to convey quality administrations. Subsequently, complete some exploration on administrations of various suppliers of carport entryway fix administrations prior to recruiting their administrations. Greater part of current specialist organizations have sites through which they transfer data about their administrations. You can visit these sites for data about the sort of administrations to anticipate from a firm. They additionally have data on costs in light of the sort of administrations you are searching for.
    Our Services: Repair, Installation, Opener, Spring, Broken Cables

    ReplyDelete
  8. An automated gate will not only protect your home and business but will make your life easier. Getting out of your car in the rain to open and close your gates isn't fun. With a new automated gate, you simply push a button and your gates will open and close as needed. You can choose from a selection of gate options, depending on your needs. Automatic Gate Installers in Tampa

    ReplyDelete
  9. Gone are the days when you had to manually open and close your gates every time you need to enter or exit your property. With the advancements in technology, automatic gate openers have become a popular solution for homeowners who value convenience and security. In this article, we will discuss the benefits of using an automatic gate opener, the different types available with Skyline Gate Automation, and the factors you need to consider when choosing one. https://www.skylinegateautomation.com.au/post/automatic-gate-opener-a-convenient-and-secure-access-solution-for-your-property

    ReplyDelete